Spark Fire

Fire•Lite’s MS-9600LS(E) and MS-9600UDLS(E) are compact,cost effective, intelligent addressable FACPs (Fire Alarm ControlPanels) with an extensive list of powerful features. Thecombination of Fire•Lite’s newer series devices and legacy300 Series devices, along with the MS-9600LS(E) orMS-9600UDLSE FACP, offer the latest in fire protection technology.LiteSpeed™ is a patented technology that polls 10devices at a time looking for new or different information.When new information is found at a specific address, the systempolls that device several times for any new data. Thisimprovement allows a fully loaded panel with up to 636devices to report an incident and activate the notification circuitsin under 10 seconds. With this new polling scheme,devices can be wired on standard twisted, unshielded wire upto a distance of 10,000 feet per loop. Each Signaling Line Circuit(SLC) loop supports up to 159 addressable detectorsincluding photoelectric, photoelectric with heat, beam, ionization,photoelectric duct, fixed heat, fixed heat with rate-of-rise,and fixed high-heat detectors. It also supports up to 159addressable modules including monitor (two-wire detector,normally open devices), dual-monitor functions (two monitorcircuits from one module, two addresses used), multimonitor(multiple monitor circuits from one module, multiple addressesused), control (for Notification Appliance Circuits), and relay(two Form-C) modules.

We are engaged in offering Siemens Addressable Fire Alarm System to our clients. Our range of all products is widely appreciated by our clients.

Wireless fire alarm system is based on radio frequency technology and the system is developed and supplied as per the buyers requirement

We are engaged in offering Fire Alarm Systems Amc Service to our clients. Our range of all products is widely appreciated by our clients.

Fire Alarm Control Panel
Compatible with Simplex ES Net or 4120 fire alarm networks Flexible standard combination of addressable initiation and addressable notification

We are engaged in offering FSP-951T Notifire Multi Detector to our clients. Our range of all products is widely appreciated by our clients.

 

The LCM-320 Loop Control Module and the LEM-320 Loop Expander Module provide NOTIFIER’s ONYX® Series of Fire Alarm Control Panels (FACPs) with Signaling Line Circuits (SLCs). The ONYX® Series NFS-640/NFS2-640 supports one LEM-320; the NFS-3030/NFS2-3030 supports up to five LCM-320s and five LEM-320s. The LEM-320 module is used to expand the NFS-640/NFS2-640 to a second loop, and to expand each LCM-320 used on the NFS-3030/NFS2-3030 — each NFS-3030/NFS2-3030 LCM-320 supports an expansion LEM-320.

The FRM-1 Relay Control Module is intended for use in intelligent, two-wire systems where the individual address of each module is selected using the built-in rotary switches. It allows a compatible control panel to switch discrete contacts by code command. The relay contains two isolated sets of Form-C contacts, which operate as a DPDT switch and are rated in accordance with the table in the manual. Circuit connections to the relay contacts are not supervised by the module. The module also has a panel controlled LED indicator. This module can be used to replace a CMX-2 module that has been configured for Form-C operation.

We are engaged in offering Notifier FRM-1 Relay Module to our clients. Our range of all products is widely appreciated by our clients.

 

The B200S-WH and B200S-IV sounder bases were designed specifically to meet the needs of dwelling unit applications. They offer maximum flexibility in configuration and operation to meet or exceed the requirements of UL268 and UL464. The sounder base is capable of producing a variety of tone patterns, including the distinctive three-pulse temporal pattern (ANSI Temporal 3) fire alarm signal now required by NFPA 72 for commercial and residential applications. The B200S-WH/B200S-IV can be commanded by the Fire Alarm Control Panel to adopt the address of the attached sensor head, but as a unique device type on the loop. By using the address, the fire alarm control panel can command an individual sounder base to activate, or a group of sounders in a suite or other multi-room configuration. The command set from the panel can be tailored to the specific event, allowing selection of volume, tone, and group. The device offers two volume levels: 75 dBA and 85 dBA.

Being as a reckoned name of this area, we are engaged in presenting Novec 1230 Fire Extinguishers Refilling Service. In addition, we render this service at low prices. To render this service, our firm appointed a skilled team who complete this service within given time frame.

Solo 200 Detector Removal Tool Faced with a vast array of different models shapes and sizes the professional needs a universal tool. Compatible with an astonishingly wide range of detectors, the colour-coded heads of the Solo 200 rotate to provide a combination of sizes and settings for just about every detector. Universal design suits widest range of detectors Suitable for use at / from angles Outstanding quality backed by lifetime warranty* Dedicated detector devices The Solo 200 can’t please all the detectors all of the time and certain detectors require specialist devices (either because of their unique form factors or because of inherent locks). A wide range of these have been developed (some available only through the detector manufacturer themselves) and more are designed as required.