Spark Fire

We are engaged in offering GST DI-9201E Addressable Smoke Detector to our clients. Our range of all products is widely appreciated by our clients.

 

DI-9103E Intelligent Rate of Rise and Fixed Temperature Heat Detector is a new addressable fire alarm device cooperating with GST intelligent fire alarm control panels to build a fire detection system. The detector shows fire alarm by the LED indicator and transmits the signal to the FACP.

 

We are engaged in offering I 9403 Gst Addressable Sounder Cum Strobe to our clients. Our range of all products is widely appreciated by our clients.

 

DI-9319E Digital Zone Monitor Unit is designed to connect conventional detectors into addressable system. When any device reports fire signal, the module will transmit the signal to the fire alarm control panel which generates fire alarm and displays the address of the module. It is also suitable to connect dry contacts input, collect action or fault signals. The installation points of the module are shown below, Wall-mount and Rail-mount. DIN-35mm rail is applicable. (Z1, Z2) IN & OUT: Loop connection, In & Out, non-polarized (V, G) IN & OUT: 24VDC power supply, V is positive, G is negative I, G: Conventional detectors, polarized Installation Features and Benefits

 

We are engaged in offering Gst200-2/1 GST Addressable Fire Alarm Control Panel to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering C-9403/04 GST Sounder Cum Strobe to our clients. Our range of all products is widely appreciated by our clients.

 

DC-9103E Conventional Rate of Rise and Fixed Temperature Heat Detector is a new generation product of GST. With built-in microprocessor, it works stably by being fixed with highly reliable fire judging program. On detecting a fire signal, it can change its own current to transmit the signal to fire alarm control panel (FACP) or addressable zone monitor unit. The detector keeps illuminating fire LED until it is reset by power-down.

 

DI-9300E Digital Single Input Module (the module) is used for receiving normally open or normally closed switch signal from fire suppression devices, and transmits these messages to fire alarm control panel (FACP). When a device of this kind is activated, the module can send the output signal through signal loop to FACP to alarm or activate relative devices.

Features:

• Normally closed input, normally open input can be set through a hand held programmer.
• Electronically addressing. Addresses can be modified in field.
• Built-in microprocessor processes messages intelligently.
• Input terminals apply AD sampling with precise testing.
• DIN-Rail mounted or Wall mounted.
• Standard: EN 54-18:2005

An addressable smoke detector is part of an addressable fire alarm system that consists of a group of smoke detectors and devices linked to a central fire control panel. In an addressable fire alarm system, an activated smoke detector can quickly be isolated and found because each device has a unique address or number.


Spark Fire System And Devices has emerged as the prominent and renowned Wholesale Trader of an exquisite range of Fire Alarm Panel, Emergency Exit Light, Smoke Detector, Fire Extinguisher, Fire Hose Reel, etc. These products have been sourced from certified and trusted market vendors. Our team works in proper coordination with our clients to understand their needs and requirements efficiently. With the help of our team, we provide our clients with quality products, thereby winning their trust and confidence.

Get the best price for Addressable Smoke Detector

Connecting to the loop of GST fire alarm system, DI-9204E Digital Manual Call Point (MCP) is suitable for public places. When there is a fire, pressing the frangible element on this MCP can send fire signal to fire alarm control panel. After receiving the signal, the control panel will show address information of the MCP and generate alarm sound.

 

GST-NRP00 Network Repeater Panel is based on GST network technology, providing remote control and indication of the fire alarm system. A certain network card is required for sitting to the network. GST-NRP00 is flush-mount or surface-mount. Its appearance and the mounting hole are shown here. 1.0mm2 or above fire cable is recommended for communication cable, and 1.5mm2 or above fire cable is recommended for power supply. All cables should be subject to local codes. Installation Data Features and Benefits Recommended Cabling Certificates and Compliance  Gulf Security Technology Co., Ltd. This publication is a generic version in which product information is shown for informational purposes only and does not constitute a specific commitment or guarantee. We are constantly pursuing the improvement of product technology to improve product performance, for which we reserve the right to adjust the configuration and technical information of the related products without notice. In addition, the description of system performance in this publication applies only to the usual situation. As a result, there may be a variety of unpredictable special circumstances in the real world, so the realization of the relevant product performance will depend on the professional investigation and analysis and the design plan.